Bethany, Oklahoma Parking Lot Striping
Bethany is a city in Oklahoma County, Oklahoma. Bethany is a part of the Oklahoma City metropolitan area. In the 2000 census, the population was 20,307.
Places to Shop In Bethany, OK
Wheel Stops In Your Parking Lot
What are Wheel Stops and Why They Are Used in Parking Lots
Wheel stops are used where it is necessary to block vehicles from traveling into a certain area. They are also used in areas where pedestrians can be in danger of a parking vehicle or for stopping a car from colliding with a wall or a barrier.
A wheel stop can prevent cars from getting over a walkway, embankment, drop off, or ditch. Local ordinance often requires the use of wheel stops in parking vicinity. ADA also encourages the use of wheel stops to prevent vehicles from entering routes used by pedestrians.
Wheel Stop Installation in Your Parking Lot
Wheel stops can be installed on different surfaces. However, the installation method varies according to the material of the wheel stop. The first step will be to clean the area where you want the installation to be done.
Position the wheel stop and drill the holes. For rubber wheel stops, 10mm pilot holes are drilled to fix it into an asphalt surface. In the case of a concrete surface, the holes can go as thick as 50mm. Before fitting the nut in the hole, extract dust and clean the area.
If you are using wheel stops made of concrete, the procedure will remain the same except for the depth of the holes which can go as deep as 70 to 80mm. Clean the holes of any dust and then add sealant adhesive to the underside of the wheel stop.
Before finalizing the installation, insert rubber plugs into the holes where the bolts were fixed.
What is the Purpose of Wheel Stops in Your Parking Lot?
Sometimes drivers mistime braking when they park their cars which can lead to moving the car further than intended or worse, hitting another vehicle. Since you can't do anything about other people's braking, it is best to install wheel stops in designated areas.
These wheel stops can protect pedestrians from hazards as well and allows them to pass by. These should be installed into places where contact with end barriers like high curbs needs to be avoided. Some local zoning also requires the installation of these to designate an area as non-accessible for vehicles.
Wheel stops also need to be maintained regularly and if they are not, they can cause more damage, and the chances of pedestrians getting injured can also increase.
Different Types of Wheel Stops
Wheel stops are used commonly in parking lots and sometimes by homeowners as well. These prevent cars from moving past a particular point and also reduce the risk of impact with something you shouldn’t be hitting. There are different kinds of wheel stops which are more beneficial depending on the type of vehicle using them and the surface where they will be installed.
Usually, wheel stops are made of rubber, concrete, or plastic. It depends on the requirement of the user which wheel stop will be best in the parking area. The size of the wheel stop depends on the vehicles which will park beside them. Oftentimes, parking lot owners rely on wheel stops made of rubber or concrete. These are easy to install and can be replaced easily as well when they wear out.
Rubber wheel stops are manufactured from recycled rubber tires. These wheel stops have multiple benefits. One is that they are recycled material. Another is that they aren't as rough as concrete so if a vehicle comes in contact with them, it is less likely to get all dinged up.
Not only that but rubber is also very durable and long-lasting as compared to other materials. It has a high resistance to moisture, oil, UV light, and extreme temperatures. Their ease of installation is due to their lightweight compared to concrete but they are more expensive.
The height of a wheel stop can vary according to your needs. A usual wheel stop is six inches in height.
Current Weather in Bethany
Parking Lot Striping Bethany
Call Today For A FREE Quote